Uncle Spot Amp repairs and/or restorations

'BlackFace'ing that 'SilverFace' Fender, UN-modifying 'new' circuits,
setting the BIAS for correct tube operation, removing master volumes
reasonable prices, fast delivery, ready for ANY gig / tour
.........................................................................................
Amp Repair/Upgrade/'Preventive Maintenance' Prices:
(Normal hourly bench rate is $60, unless otherwise noted)
.........................................................................................

*NOTE *
Sorry, but there is *NO* "waiting 'till the amp is fixed" in the shop any longer.
Repair work is to be dropped off, shipped in, or picked up when finished
in the order of completion - *NO* exceptions.
*ANY* electrical part (this includes TUBEs) that is returned 'working properly' will incur a 50% restocking fee. The *ONLY* exception would be a defective part that is due to manufacturing - *NOT* due to misuse, abuse, or over-stressed due to use in an improper manner, or wrong circuit.
Hourly labor charges are *NOT* refunded or negotiated either.

Fender MODELS (BF & SF)	RETUBE	REPLACE ALL ELECTROLYTIC CAPACITORS	NEW 12' POWER CORD	Set Bais (OutPut Tubes)	THE WORKS	Dual Channel Reverb	Blackface that Silverface Fender	NEW VOLUME POTS	NEW POWER/ StndBy SWITCHES
PRINCETON, DELUXE	$115	$150	$15	$40	$280	N/A	$45	$25	$20
BASSMAN	$125	$190	$15	$40	$330	N/A	-CALL- or e-mail for price(s)	$25	$20
VIBROLUX, DELUXE Rev. Princeton Rev. VIBROVERB, PRO, SUPER, BANDMASTER	$145	$190	$15	$40	$350	$40	$45	$25	$20
TWIN Rev, DUAL SHOWMAN(Rev)	$175	$190	$15	$40	$380	$40	$45	$25	$20

NOTE: *ANY* repair work needed is an additional charge to the above list. You will be contacted if more work is required to get your amp in working order. The prices above are for replacing the tubes, electrolytic caps and associated components to bring the amp within OEM specs; NOT for repairing amps needing tech work. Shipping/handling/insurance is an additional cost. E-mail or call for details.

Additional NOTE: There is a $100 minimum billing on amps shipped in for repair due to the paperwork and time involved unpacking and repacking the amps.

If you're shipping your amp to me just remove all the tubes and pack them in a separate box (don't even send them if you are getting new tubes). Ship the chassis only in a sturdy cardboard box with plenty of bubble wrap or crushed paper padding. Do ***NOT*** use foam peanuts. Double box if needed.
Ship by UPS, FedEx ground (the best IMO), or USPS, with appropriate insurance to:

*NOTE: Preferred payment is cash, USPS money order
(Please make the amount payable to either Uncle Spot, or Ron Veil) ,
or you can use PayPal (Visa / Mastercard) to electronically transfer money.

click on the PayPal logo - on the right hand side you'll see
"Make an instant payment to: Ron Veil"
click on the "send money now" button

Typical (work/repair) turnaround time is 2-5 weeks; depending on 'travel plans' - I take care of musical groups/customers on the road, and in other states; and that could take me out of the area for up to a month. That is the only 'variable' on my repair estimates. Please call to check.

        New JJ-6V6, Ruby Tube, Sovtek, or JJ 6L6s, Ruby Tube, or JJ 12AT7, JJ 12AX7S, Sovtek 12AX7LPS tubes, EH-12AX7, JJ-GZ34, WeberVST Copper Top rectifier tube emulators, Sprague Atom electrolytic, Orange Drops, and Silver Mica capacitors are standard.

    New cabinet hardware, Tolex and baffle regrilling are also available.

      The above model names are trade names of Fender Musical Instruments. Uncle Spot is not associated with Fender.™